DAP | D1464 | COM-42 | Wireless 2-Channel Handheld System

If you would need 2 wireless microphones, and have just one channel available on your inputs, the DAP COM-42 is the ideal wireless microphone set for you. The wireless receiver has a balanced XLR output for each wireless transmitter, and also an unbalanced MIX output on a 6.3 mm Jack plug. By using the volume buttons on the front of the receiver, it is easy to setup the desired balance between 2 transmitters. The COM-42 has 99 frequency present which can be set easily through infrared synchronisation technique. A clear LCD display shows the signal strength, audio level and carrier frequency of each channel. A COM-42 wireless microphone set contains a receiver and 2 metal handheld transmitters. Also it is possible to use an optional beltpack transmitter.

Technical specifications
Wireless Microphone Frequency Start: 606 MHz
Wireless Microphone Frequency End: 630 MHz
RF Power: 10 mW
RF Bandwidth: 24 MHz
THD Level: < 1.0 %
Signal-to-noise Ratio: > 100 dB
Microphone Type: Dynamic moving coil
Microphone Sensitivity: 2.2 mV
Polar Pattern: Cardioid
Max. SPL: 135 dB
Frequency Response Minimum: 50 Hz
Frequency Response Maximum: 16000 Hz
RF Antenna Inputs: 2
RF Antenna Input Connection: BNC
Microphone Output: 1
Microphone Output Connection: 3-pin XLR / TS unbalanced 6.3 mm
Battery Type: AA
Runtime Average: 6 h
Transmitter Type: Handheld
Receiver Type: True diversity
Power Connector In: Low Voltage DC plug
Transmitter Weight: 0.27 kg