Audio
Cabling
Light
Power distribution
Rigging
Consumables
Video & projection
Stage
Sale
Voice-Acoustic | Paveosub-115sp DDA | 15-inch subwoofer | active | with built-in Dante
The Paveosub-115sp DDA is a very compact, passive bass-reflex subwoofer for universal applications. This DDA variant is equipped with built-in Dante. Read more
Voice-Acoustic Paveosub-115sp DDA: 15-inch active subwoofer with Dante
The Paveosub-115sp DDA is a very compact bass-reflex subwoofer for universal applications.
A stands for a new generation of DSP and input boards that can handle a variety of signals: DANTE, digital AES/EBU, AES67 and analogue inputs. The signals can be further looped through.
With its low overall height of only 36 cm and a width and depth of only 54 x 57 cm, the bass is ideal for fixed installations where a discreet appearance is important and the loudspeakers should be integrated into the architecture as unobtrusively as possible.
In mobile use, the bass saves a lot of space and weight with only 110 litres of transport volume.
The two large handles are touchable from all sides and are located in the centre of gravity.
For easy handling of the subwoofer, which weighs only 30.4 kg, a removable and stackable wheel board is optionally available. The transport cover is also optional and also serves as weather protection for outdoor events.
The Paveosub-115sp DDA uses a newly developed neodymium chassis with a 4-inch voice coil that can withstand a load of 1200 W AES. The magnet system has three demodulation rings for particularly low distortion. Solid cooling fins ensure low-power compression at maximum performance. Together with a high linear stroke and a low moving mass, the subwoofer offers deep, powerful yet highly accurate bass reproduction.
Internal struts ensure maximum stability and prevent unwanted enclosure resonances.
Placement
The subwoofer can be used either horizontally or upright. On two sides there are stacking troughs, rubber feet and M20 flanges for flexible use with a nice look, depending on the combined top. Standing upright, the Paveosub forms a very slender silhouette.
The stacking troughs on the top of the bass are arranged in the same size as the CXN-16 stage monitor. Moreover, both speakers have a width of 54 cm, which also forms an elegant optical unit and makes them a professional set for drum or DJ monitoring, for example. A CXN-16 bi-amping can be powered in half-powered mode from a self-powered Paveosub-115sp, with 3-channel 4 kW power amplifier module and DSP board.
Plug&play
The Paveosub-115sp DDA is a plug&play system: all necessary settings for different configurations are stored as factory settings in its internal memory. Whether for a single bass, in a stack with multiple basses, cardioid and end-fire bass arrays or as the centre of a satellite system in combination with different top parts (passive stereo, bi-amping tops mono), the right preset is easily selected via the display and the The user immediately has the best possible performance and operational reliability. A number of functions, access options and settings are also available to the experienced technician and audio professional.
A display, knob and encoder wheel are integrated at the back, giving you access to almost all parameters even without PC control. The functions can be password-locked against unauthorised access.
The display can be dimmed and completely switched off in two modes and prevents unwanted stray light. The display is reactivated by pressing a button or the encoder.
Electronics
The active electronics are convection-cooled by a large heat sink and are maintenance-free. No dust or moisture is sucked in, making the Paveosub-115sp DDA also suitable for fixed fixed installations. The stable cooling fins are generously rounded and have no sharp edges. The control unit, DSP unit and signal connections are protected from moisture with a stable, transparent cover. The cooling line is waterproof and the powerCON TRUE1 connections are fitted with a rubber sealing cap.
Whether as a single bass, in a stack with multiple basses, cardioid and end-fire bass arrays or as the centre of a satellite system in combination with different top parts (passive stereo, bi-amping tops mono), the right preset is easily selected via the display and the The user immediately has the best possible performance and operational reliability.
A number of functions, access options and settings are also available to the experienced technician and audio professional. A display, knob and encoder wheel are integrated at the back, giving access to almost all parameters even without PC control. The functions can be password-locked against unauthorised access. The display can be dimmed and completely switched off in two modes and prevents unwanted stray light. The display is reactivated by pressing a button or the encoder.
Control
The 15-inch chassis of the Paveosub-115sp DDA is powered by one channel (1,580 W / 8 , 2,400 W / 4 Ω) of the internal power amplifier module. 2 x 800 W are available for satellites or monitors. The woofer is 8 .
A second Paveosub-115 and up to 4 additional speakers can be powered from a Paveosub-115sp DDA.
Specifications
- One 15-inch neodymium strip woofer with 4-inch voice coil
- Lower limit frequency: 34Hz (-10dB), 45Hz (-3dB)
- Impedance: 8Ω, actively separated
- Load capacity: 1200W (AES), 2400W (programme), 4800W (peak)
- Average efficiency 1W/1m: 98dB SPL
- Sound pressure level: 129dB SPL (AES), 132dB SPL (program), 135dB SPL (peak)
- Connection: 4 x NEUTRIK NL4 IN / OUT 2 +/-
- Polyurea coating in RAL 9005, optionally with Warnex textured paint and in special colours
- Dimensions (mm) H x W x D: 360 x 540 x 570
- Weight: 30.4kg
The Paveosub-115sp DDA also comes in the self-powered version, without Dante, with 4kW power amplifier module and DSP board or a passive variant: the Paveosub-115sp or Paveosub-115.
