Voice-Acoustic | Rack-mounted power distributor 32A | 1x 32A | 6x powerCON or 6x powerCON TRUE 1 or 1x Harting 16p | Schuko | Digital multi meter | 6x RCBO

The intelligent power distributor PD-32-6 V2 is suitable for all applications in event technology and permanent installation. The three versions all have a 32A CEE input with a permanently attached 2 m H07RN-F 5G6 cable and a 32A CEE output. Fitted as standard with 6 times Schuko hinged lid sockets, as well as six Neutrik powerCON, six Neutrik powerCON TRUE1 or one Harting ILME 16-pin. Optionally, the Schuko hinged lid caps can be replaced by the Swiss T23 standard or French/Belgian Schuko, please ask us about this if required.

Security

Internal cabling is done with a cable cross-section of 2.5 and 6 mm². An earth clamp is attached at the rear to ground trusses, platforms or other metal structures. The PD-32-6 V2 has a new type of LS / FI combination circuit breaker for particularly high operational safety of all connected devices and the lowest possible shutdown in case of a fault.

Conventional power distribution boards have one common earth leakage circuit breaker (called FI or RCD) that switches off all phases and therefore all outputs in the event of a residual current. This means that all connected consumers are completely disconnected from the power supply when the FI switch is activated. In this Voice-Acoustic power distributor, each of the 6 circuits is equipped with a combination machine, so that in the event of a fault current, only the relevant circuit breaker is tripped and the other loads on the remaining 5 circuits are supplied.

A major advantage of this is that the damage can be quickly located and repaired, as it is immediately possible to see which line the fault current is on.

Digital multi-meter

For the best possible monitoring of all values, the PD-32-6 V2 power distributor has a multi-meter for recording electrical values in a low-voltage network. The display can show network type, currents, voltages, frequency and operating hours. The average current values and their maximum values, as well as the neutral conductor current are also determined. Thus, even load distribution can be achieved without knowing the power consumption of individual consumers.

Operating hours counter

The operating hours counter provides information on operating time and can help in rentals to check the actual operating time of the equipment or, for example, to set maintenance intervals in fixed installations to operating hours.
The measured values are easily called up with the up and down buttons without complicated menu navigation.

Specifications

• Intelligent power distributor from Voice-Acoustic
• 32A CEE input
• 6x Schuko output, optionally Swiss or French/Belgian equipped
• Choice of PowerCON, True1 or Harting 16
• 32A CEE output, for loop-through possibilities
• Equipped with RCBO
• Equipped with digital multi-meter
• 19-inch, 3HE format

The power distributor is supplied in 19-inch format with a height of 3HE.
For example, a total of 6 HDSP-6 amplifiers can be powered by one Voice-Acoustic PD-32-6 V2.